ON THIS PAGE: You will find a list of common tests, procedures, and scans that doctors use to find the cause of a medical problem. Use the menu to see other pages.
Doctors use many tests to find, or diagnose, cancer. They also do tests to learn if cancer has spread to another part of the body from where it started. If this happens, it is called metastasis. For example, imaging tests can show if the cancer has spread, but they can never be used alone to diagnose NSCLC. Imaging tests show pictures of the inside of the body. Doctors may also do tests to learn which treatments could work best.
For most types of cancer, a biopsy is the only sure way for the doctor to know whether an area of the body has cancer. In a biopsy, the doctor takes a small sample of tissue for testing in a laboratory. If a biopsy is not possible, the doctor may suggest other tests that will help make a diagnosis.
This list describes options for diagnosing this type of cancer. Not all tests listed below will be used for every person. Your doctor may consider these factors when choosing a diagnostic test:
The type of cancer suspected
Your signs and symptoms
Your age and medical condition
The results of earlier medical tests
In addition to a physical examination, the following tests may be used to diagnose and stage lung cancer:
Imaging scans are very important in the care of people with NSCLC. However, no test is perfect, and no scan can diagnose NSCLC. Only a biopsy can do that (see below). Chest x-ray and scan results must be combined with a person’s medical history, a physical examination, blood tests, and information from the biopsy to form a complete story about where the cancer began and whether or where it has spread.
CT scan. A CT scan produces images that allow doctors to see the size and location of a lung tumor and/or lung cancer metastases. A CT scan creates a 3-dimensional picture of the inside of the body using x-rays taken from different angles. A computer combines these images into a detailed, cross-sectional view that shows any abnormalities or tumors. A CT scan can be used to measure the tumor’s size. Sometimes, a special dye called a contrast medium is given before the scan to provide better detail on the image. This dye can be injected into a patient’s vein or given as a pill to swallow.
Positron emission tomography (PET) scan. A PET scan is usually combined with a CT scan (see above), called a PET-CT scan. However, you may hear your doctor refer to this procedure just as a PET scan. A PET scan is a way to create pictures of organs and tissues inside the body. A small amount of a radioactive sugar substance is injected into the patient’s body. This sugar substance is taken up by cells that use the most energy. Because cancer tends to use energy actively, it absorbs more of the radioactive substance. A scanner then detects this substance to produce images of the inside of the body.
Magnetic resonance imaging (MRI) scan. An MRI also produces images that allow doctors to see the location of a lung tumor and/or lung cancer metastases and measure the tumor’s size. An MRI uses magnetic fields, not x-rays, to produce detailed images of the body. A special dye called a contrast medium is given before the scan to create a clearer picture. This dye can be injected into a patient’s vein or given as a pill to swallow. MRI scanning does not work well to take pictures of parts of the body that are moving, like your lungs, which move with each breath you take. For that reason, MRI is rarely used to look at the lungs. However, it may be helpful to find lung cancer that has spread to the brain or bones.
Bone scan. A bone scan uses a radioactive tracer to look at the inside of the bones. The tracer is injected into a patient’s vein. It collects in areas of the bone and is detected by a special camera. Healthy bone appears gray to the camera, and areas of injury, such as those caused by cancer, appear dark. PET scans (see above) have been replacing bone scans to find NSCLC that has spread to the bones.
The procedures that doctors use to collect tissue to diagnose lung cancer and plan treatment are listed below:
Biopsy. A biopsy is the removal of a small amount of tissue for examination under a microscope. In recent years, doctors have learned it is helpful to have a larger tumor sample in order to determine the subtype of NSCLC and to do additional molecular testing (see below). If not enough of the tumor is removed to do these tests, another biopsy may be needed. A pathologist then analyzes the sample(s). A pathologist is a doctor who specializes in interpreting laboratory tests and evaluating cells, tissues, and organs to diagnose disease.
Bronchoscopy. In a bronchoscopy, the doctor passes a thin, flexible tube with a light on the end into the mouth or nose, down through the main windpipe, and into the breathing passages of the lungs. A surgeon or a pulmonologist may perform this procedure. A pulmonologist is a medical doctor who specializes in the diagnosis and treatment of lung disease. The tube lets the doctor see inside the lungs. Tiny tools inside the tube can take samples of fluid or tissue so the pathologist can examine them. Patients are given mild anesthesia during a bronchoscopy. Anesthesia is medication to block the awareness of pain.
Needle aspiration/core biopsy. After numbing the skin, a special type of radiologist, called an interventional radiologist, removes a sample of the lung tumor for testing. This can be done with a smaller needle or a larger needle depending on how large of a sample is needed. The doctor uses the needle to remove a sample of tissue for testing. Often, the radiologist uses a chest CT scan or special x-ray machine called a fluoroscope to guide the needle. In general, a core biopsy provides a larger amount of tissue than a needle aspiration. As explained above, doctors have learned that more tissue is needed in NSCLC for diagnosis and molecular testing.
Thoracentesis. After numbing the skin on the chest, a needle is inserted through the chest wall and into the space between the lung and the wall of the chest where fluid can collect. The fluid is removed and checked for cancer cells by the pathologist.
Thoracoscopy. Through a small cut in the skin of the chest wall, a surgeon can insert a special instrument and a small video camera to assist in the examination of the inside of the chest. Patients need general anesthesia for this procedure, but recovery time may be shorter with a thoracoscopy because of the smaller incisions that are used. This procedure may be referred to as video-assisted thoracoscopic surgery or VATS.
Mediastinoscopy. A surgeon examines and takes a sample of the lymph nodes in the center of the chest underneath the breastbone by making a small incision at the top of the breastbone. This procedure also requires general anesthesia and is done in an operating room.
Thoracotomy. This procedure is performed in an operating room, and the patient receives general anesthesia. A surgeon then makes an incision in the chest, examines the lung directly, and takes tissue samples for testing. A thoracotomy is the procedure surgeons most often use to completely remove a lung tumor.
Molecular testing of the tumor
Your doctor may recommend running laboratory tests on a tumor sample to identify specific genes, proteins, and other factors unique to the tumor.
There are several genes that may be changed, called mutations, in a lung tumor that can help the cancer grow and spread. These mutations are found in the tumor, and not in healthy cells in the body. This means that they are not inherited or passed down to your children. Mutations that are known to contribute to lung cancer growth often occur on 1 or more of several genes, including EGFR, ALK, KRAS, BRAF, HER2, ROS1, and RET. Testing the tumor for some of these genes is now common for later-stage NSCLC. Testing for these genes may also be done for earlier stages of the disease.
Results from these molecular tests help decide whether your treatment options include a type of treatment called targeted therapy, which can be directed at specific mutations (see Treatment Options). Mutations for which targeted therapies exist are much more likely to occur in patients with the adenocarcinoma type of NSCLC and in patients who never smoked.
If you have later-stage NSCLC, your doctor may also recommend PD-L1 testing. PD-L1 is found on the surface of cancer cells. This protein stops the body’s immune cells from destroying the cancer. Knowing if the tumor has PD-L1 helps your doctor decide whether your treatment options include certain types of immunotherapy (see Treatment Options). These types of immunotherapy block PD-L1 and allow the immune system to target the cancer.
After diagnostic tests are done, your doctor will review all of the results with you. If the diagnosis is cancer, these results also help the doctor describe the cancer. This is called staging.
Finding out where the cancer started
NSCLC starts in the lungs. Many other types of cancer start elsewhere in the body and spread to the lungs when they metastasize. For example, breast cancer that has spread to the lungs is still called breast cancer. Therefore, it is important for doctors to know if the cancer started in the lungs or elsewhere.
To find where the cancer started, your doctor will take into account your symptoms and medical history, physical examination, how the tumor looks on x-rays and scans, and your risk factors for cancer. A pathologist can perform tests on the biopsy sample to help find out where the cancer began. Your doctor may recommend other tests to rule out specific types of cancer. If, after these considerations, the doctor is still not sure where the cancer started, the doctor may give a diagnosis of metastatic cancer “of unknown primary.” Most treatments for metastatic cancer of unknown primary that are first found in the chest are the same as those for metastatic lung cancer.
Coping with a NSCLC diagnosis
For most patients, a diagnosis of NSCLC is extremely stressful. Some patients develop anxiety and, less commonly, depression. Patients and their families should not be afraid to express the way they are feeling to doctors, nurses, and social workers. The health care team is there to help, and many team members have special training and experience that can make things easier for patients and their families.
In addition to emotional support and education, the doctor may prescribe anti-anxiety medication and occasionally, an antidepressant. He or she may refer the patient to a counselor, psychologist, social worker, or psychiatrist. Furthermore, patients and their families should be aware that there are resources available in the community to help people living with lung cancer. Some patients feel comfortable discussing their disease and experiences throughout treatment with their doctor, nurse, family, friends, or other patients through a support group. These patients may also join a support group or advocacy group in order to increase awareness about lung cancer and to help fellow patients who are living with this disease.
A NSCLC diagnosis is serious. However, patients can be hopeful that their doctors can offer them effective treatment. They may also be able to take some comfort knowing that the advances being made in the diagnosis and treatment of NSCLC will provide more and more patients with a chance for cure.
Even after NSCLC is diagnosed, it is still beneficial to quit cigarette smoking. People who stop smoking have an easier time with all treatments, feel better, live longer, and have a lower risk of developing a second lung cancer or other health problems. Stopping smoking is never easy and even harder when facing the diagnosis of NSCLC. People who smoke should seek help from family, friends, programs for quitting smoking, and health care professionals. None of the products available to quit smoking interfere with cancer treatment. Learn more about stopping tobacco use after a cancer diagnosis.
The next section in this guide is Stages. It explains the system doctors use to describe the extent of the disease. You may use the menu to choose a different section to read in this guide.